Aero Sport Minute Bed FAQs
1. Dimensions
 

Twin: 74" L X 39" W X 7" H; supports up to 650 lbs. Weight: 6.82 lbs.
Queen: 78 " L X 60" W X 7" H; supports up to 750 lbs. Weight: 11 lbs.

Thickness of PVC: 16 gauge.
Plush sleep surface.
All Minute Beds feature a 9” built-in pillow.
2. Material
  The Aero Sport Minute Bed is made of a special 16 gauge nylon / PVC blend. The sleep surface is made of flocked PVC. The Aero Sport Minute Bed is puncture-resistant and electronically welded at the seams for superior strength and durability.
3. Cleaning
  We recommend that you do not let the plush surface of your Aero Sport Minute Bed get wet. Repeated exposure to water or other liquids may cause damage to the plush surface that will not be covered by your warranty. Should liquid come in contact with the plush surface, blot liquid dry and use a damp cloth to remove any stain. Let surface air dry completely.

You may clean the PVC on your Aero Sport Minute Bed with a mild dishwashing detergent or household cleaner. Do not use strong chemicals or other compounds. Allow your Aero Sport Minute Bed to air dry completely after cleaning and before storing.
4. General Care and Maintenance
 
  1. Inspect your Aero Sport Minute Bed prior to each use.
  2. Keep your bed away from any sharp objects. Large cuts or snags may not be repairable and will not be covered by your Aero Sport Minute Bed warranty.
  3. When not in use, store your bed in a clean, dry place out of extreme temperatures. Do not allow pump or charger to get wet at any time.
  4. In case of incidental damage to your bed, a repair kit with instructions is included with each bed. Please follow repair kit instructions carefully. Additional vinyl repair kits can be purchased through Customer Service.
  5. Do not allow water to enter your Aero Sport Minute Bed through the Air Release Valve. If water does enter the bed, make sure to empty it and completely dry the bed before storing.
5. Important Safety Information And Warnings
 It is your responsibility to read and always follow the safety, care and maintenance instructions for your Aero Sport Minute Bed. Always instruct and supervise others on the proper use, maintenance and safety of your bed.

IMPORTANT: Preparation of your AeroBed WeekenderBed Raised requires no tools. Use of tools may damage your bed.
  1. WARNING: Adult supervision required. Follow all safety instructions to avoid serious injury.
  2. WARNING: This product has an electrical component that is not a toy. To avoid risk of fire, burns, injury and shock, it should be not played with or placed where small children can reach it.
  3. Remove all sharp objects from area where bed will be set up and used.
  4. Do not use this product on abrasive surfaces or near pointed/sharp items or surfaces. Protruding objects may puncture mattress.
  5. The mattress is made of PVC and therefore may melt or burn if it comes in contact with any flame or heat source. Do not place it near or against heaters, open flame or other hot objects.
6. Pump Details
  Powerful and portable yet very compact, the Rechargeable Ni-Cd pump is included with the Aero Sport Minute Bed. The patented Auto on feature allows for hands-free inflation with a simple twist of the pump.
PUMP MUST BE CHARGED FOR 24 HOURS PRIOR TO THE FIRST INFLATION. Use the included AC adapter to charge your new Rechargeable Ni-Cd pump for 24 hours. For maximum performance, be sure to fully discharge pump before recharging. After initial charge, charge pump for 12 hours at a time. Charging your pump for periods longer than 12 hours will substantially decrease the life of your battery. For emergencies only, a 3-hour charge will provide one inflation.

To Charge:
a) Remove tiny rubber plug from the hole on the back of the pump.
b) Insert the charger's mini-plug in hole on pump.
c) Plug charger unit into any standard 110 V electrical outlet and let it charge for no more than 12 hours after initial 24 hour charge. (Note: 220V product sold outside North America).

The Rechargeable Ni-Cd Pump comes complete with a transformer for recharging. The transformer is a 120 volt AC, 60Hz, 6W device. The pump produces 7.5 volts DC.
7. Usage Conditions
  Your Aero Sport Minute Bed is meant to be used as an extra bed, but is durable enough to sleep on every night. Your Aero Sport Minute Bed is water resistant and can be used both indoor and outdoor. Do not allow the pump to get wet. Allowing the pump or the charger to get wet will void your warranty. We recommend that you do not let the plush surface of your Aero Sport Minute Bed get wet. Repeated exposure to water or other liquids may cause damage to the plush surface that will not be covered by your warranty. Your Aero Sport Minute Bed is not a toy and is not meant to be used as a lifesaving device.

The Aero Sport Minute Bed is made of heavy duty, puncture resistant PVC. However, avoid leaving sharp objects near the Aero Sport Minute Bed due to the risk of punctures. Be sure to use the Aero Sport Minute Bed on a flat surface without any sharp points that can puncture the bed. In addition, the Aero Sport Minute Bed is engineered to support several hundreds of pounds of weight, however, we do not recommend jumping on the Aero Sport Minute Bed or using the Aero Sport Minute Bed as a trampoline or toy.
8. Trouble Shooting
 

Problem: Bed has a broken part

Your Aero Sport Minute Bed and pump are guaranteed to be in perfect condition when you receive it. The bed and pump are also guaranteed to perform under normal usage conditions for one year from the date of purchase. If, upon purchase, you discover your bed or pump is in some way defective, or if a part breaks within the warranty period, contact Consumer Services, or return it to the place of purchase for a refund. All parts are replaceable.

Problem: Air Release Valve is broken

If your valve is damaged (e.g., the tab has broken off), you can request a new valve, contact Consumer Services.

Problem: Product is leaking air.

  1. Air is leaking from the Air Release Valve.

    If air is leaking from Air Release Valve, carefully remove the round black plastic gasket (or white silicone gasket, depending on model) inside the Air Release Valve cover.

    Rinse this gasket in warm water for 10 minutes, then cool and towel dry.

    Re-insert gasket in the valve cover, making certain that the side of the gasket with the U-shaped groove faces into the cover. Leave valve in open position for approximately 30 minutes. Then close and proceed with inflation instructions.
  2. Air is leaking from a puncture or tear in the product.
    If you have a puncture or tear in your product, it may be possible to repair the damage by using the Vinyl Repair Kit included with your product. Follow all instructions and heed all warnings included in the repair kit.

Problem: Bed won't inflate.

  1. The Air Release Valve is open. If the valve is open, close it by using two thumbs to push cover and snap it into valve.
  2. The pump is not charged. Charge pump according to directions in instruction manual included with your Aero product, or see instructions on this website.
  3. The pump is not plugged in. Plug pump into any 110 Volt AC electrical outlet (220V product sold outside North America).

Problem: My rechargeable pump got wet. What do I do?

Once water gets inside the rechargeable pump, it may no longer work. Replacement pumps can be purchased by visiting our Accessories page.
9. Instruction Manual

The Minute Bed Sport Instruction Manual is available in .pdf format. Click the link to open the manual in your browser, or right-click the link and choose "Save Target as..." or "Save File as..." to save the manual to your hard-drive. To view this file, you will need to download Adobe Acrobat Reader. It's free.

For any other questions about the Deluxe Aerobeds please call 1-800-303-7574, or email salesquestions@comfortchannel.com