See our complete line of
RAVE Sports Water Playgrounds and Towables!
RAVE Sports® Water Whoosh™ Information
How long does it take to set up the Water Whoosh™?
It takes approximately 30 minutes to set up the Water Whoosh™ for the first time. This time can be reduced to about 10 minutes if the slide cover is left on during storage and you gain more experience setting it up.
How do you inflate the Water Whoosh™ tube?
We highly recommend using an industrial inflator / deflator like the RAVE Hurricane Blower. With this blower, it only takes about 5 minutes to inflate the Water Whoosh™ tube. You can order this high volume inflator / deflator directly from Zearth.com by calling 800-303-7574. Using the air output side of a shop vacuum is also an effective way of swiftly inflating the tube, since shop vacuums typically have high air flow rates.
Can I use an air compressor to inflate the product?
We do not recommend the use of an air compressor as over inflation can damage the tube. RAVE’s commercial grade products are fully inflated with only 1-2 PSI of air pressure. The high pressure output of most air compressors can easily cause over inflation if not monitored properly during the inflation process. If a compressor is used, be sure not to exceed 2 PSI within the tube.
How do you deflate the Water Whoosh™?
Again, you can use the RAVE Sports® Hurricane inflator / deflator or a shop vacuum, positioned in reverse, to swiftly deflate the tube. Another option is to lock the valve open on the tube and let the air naturally flow out of the large opening of the valve.
What is the product made of?
The inflatable material is the same high-grade material used in many ocean-going inflatables and inflatable military boats. It’s a 1000 Denier Polyester with 28 oz. UV treated PVC. All seams are heat-welded for maximum strength and doubled at key stress points. We don not use natural rubber or natural rubber latex in any of our products. Therefore, people with allergic reactions to latex should not have any problems using our products.
Can the Water Whoosh™ be used in salt water?
Yes, it can be used in the ocean and other salt water bodies as there are almost no metal components on the product and they are all made of stainless steel to provide maximum resistance to corrosion.
Will the Water Whoosh™ fade in the sun?
The tube will retain its brilliance for years because UV inhibitors are specially blended into the chemistry of our PVC materials. We also recommend using 303 Aerospace Protectant as a secondary topical agent (like sunscreen for your skin) to prevent fading and degradation. 303 also restores lost color and luster, making your product look like new. Periodic (monthly) application of 303 Protectant will provide the best results.
Can the Water Whoosh™ be left out in the water?
Most people leave their product in the water for the season. There are two things to consider: 1) your local regulations regarding anchoring and 2) if the area is consistently exposed to high winds. In those parts of the world where the water never freezes, the Whoosh can be left in all year. Specific anchoring recommendations are provided in the owner manual.
How deep does the water need to be to use the Water Whoosh™?
We recommend anchoring the product in at least 8 feet of water in an area at least 20 feet from any docks, boats or other obstructions. Use reasonable care to ensure that there is adequate clearance free of obstructions above, around and below the product. Do not allow the Whoosh to be used on land, in pools or on any other hard surface.
How do you anchor the Water Whoosh™?
Sufficient anchoring methods will vary depending on your local conditions (ex. Water depth, type of water bottom, exposure to high winds or water current, etc.). Please consult with local authorities (ie. Dock and lift dealerships, marinas or your local water enforcement officials) to inquire about proven anchoring methods or anchoring restrictions in your area. For day use anchoring, a RAVE Sports® and anchor bag works well ( call 800-659-0790 for more information). For seasonal anchoring, we recommend approx. 60lbs of anchor weight. A primary anchor attachment ring is located on the underside of the slide and a secondary anchoring ring is located towards the climbing side to help maintain product orientation relative to the shoreline.
How can you make your slide more slippery?
Before sliding down the slide for the first time, treat the slide surface using 303 Protectant. This will make the vinyl very slippery even when dry. For better results, splash some water on the surface of the slide periodically.
How many people can use the Water Whoosh™ at a time?
We recommend only one person climbing and one person sliding at a time. This will prevent overcrowding and decrease any chance for collision of users. Supervised activity on the product is highly recommended. Do not allow anyone to jump or dive off the top of the slide.
Does it attach to my Aqua Jump™ or other jump platform products?
Although the Water Whoosh™ was originally designed to be used in a stand-alone application, it can be butted up next to most any jump platform product.
Can the Water Whoosh be repaired on site?
Yes, Locate the leak or puncture in the product by spraying the tube with soapy water. When you find the leak and determine the hole size, use a patch from the repair kit and cut a swatch 1 inch wider than the hole. Deflate the product and clean the area around the hole with rubbing alcohol. Apply glue from the repair kit to the patch and the area around the hole. Let the glue dry approximately 2 minutes until it becomes tacky. Stick the glued parts to each other and rub them together using a hard, smooth, flat surface. Let the patch dry for at least 24 hours before inflating. For bigger holes and tears, follow the same procedure but put a patch on the inside as well as the outside.
What is the warranty on the Water Whoosh™?
RAVE Sports® offers a one-year warranty for defects in material or workmanship. If the product is being used commercially, like at a camp or resort, there is a 6-month warranty.
|
