If you are looking for a reliable and sturdy flat panel articulating monitor arm, look no further. The Idea@Work Mantis Series Flat Panel Monitor Arms are able to support up to 25 lbs, if needed, and will fit most any flat panel monitor made today. The arm is height adjustable. The range is 19"; 11" above the hinge, and 8" below the hinge.

• Wishbone Extension: MA 1000 and MA 1500 only
  
• Full range of motion - 360 degree horizontal rotation from desk mounted base; 180 degree horizontal rotation from extension arm; 180 degree horizontal rotation/75 degree spherical tilt from socket clamp
  
• Height adjustable arm - the range is 19"; 11" above the hinge, and 8" below the hinge.
  
• Universal Mount - Standard mounting hole patterns are based on industry accepted VESA standards to accomodate most flat screen monitors
  
• Tune-able Load Adjustment - Includes adjustment tool so you can easily change raising/lowering tension to accommodate different monitor weights and user preferences
  
• Bearing swivel base - Allows for smooth operation and adjustment of arm in a full 360 degree arc
  
• Strong - Made of a strong yet lightweight die-cast aluminum and thermoplastic resin
  
• Aesthetic Appeal - Low profile mounting systems and integrated cord management minimizes worksurface clutter. Black and platinum color options compliment any decor
  
• UPS Ground shipping included on all Idea@Work orders
• Expedited shipping available
  
  Model/Sizing Guide:
  
  MA-500:
• Uses cylinder rated for 2-10 lb. flat panel monitors.
• 11.5-18.1 inches of horizontal arm range.
  
  MA-550:
• Uses cylinder rated for 11-25 lb. flat panel monitors.
• 11.5-18.1 inches of horizontal arm range.
  
  MA-1000:
• Uses cylinder rated for 2-10 lb. flat panel monitors.
• 16.72-23.32 inches of horizontal arm range.
  
  MA-1500:
• Uses cylinder rated for 11-25 lb. flat panel monitors.
• 16.72-23.32 inches of horizontal arm range.

Looking for an articulating monitor arm that is solid, strong and built to last? The Idea@Work Mantis articulating monitor arms are recognized as the best of the best, and are available with four different types of mounting brackets, accomodating all desk configurations.

The Idea@Work Mantis articulating monitor arm features a counterbalanced load adjustment system that enables a full range of motion while ensuring maximum stability. Move the Mantis-supported monitor into desired position with a gentle push. That's where it will stay, suspended in mid-air, until you move it again. Reduce window glare, use with a sit to stand set up, or use at "shift" workstations to easily adjust for each user.

The Wishbone Extension is an extended arm featured on the MA1000 & MA1500. It is designed for larger (read wider) desks where the arm/monitor would be mounted further away from the user. The monitor can be brought closer to the user yet allow for more free desk space.

Mounting Bracket Guide:

• Clamp Mount - Attaches to your desk's work surface. Requires a 3" overhang to clamp on securely.
  
• Oval Desk Grommet Mount - Attaches to work surfaces. Requires a 2 5/16 x 4 inch hole in desk.
  
• Wall Mount - Attaches directly to wall surfaces (into a wall stud only).
  
• Round Desk Grommet Mount - Works with 2 1/2 inch round hole in desk.